Infeed Hopper and Pre-feeder:

·          6”Æ  STAR Pre-feeder [Patent Pending], controls infeed of concrete mix into rotary screen/wash section.  Works with aggregate sizes up to ¾“minus.

·          1HP direct-drive Gearmotor.

·          Four (4) replaceable SBR fins.

·          UHMW Bushings for support (NO bearings to grease!).

·          Pressurized water flow to UHMW bushings provides lubrication.  Water discharge from bushings then flows through trough to carry the concrete mix into the rotary screen/wash section.

·          Various Infeed Hopper sizes and shapes available.  From ¼ to 1 full cubic yard capacity.

·          Equipped with water spray bar to clean residual material from hopper.

 

Rotary Screen/Wash Section:

·          Rotary Screen, 12"Æ x 2' Long.

·          Stainless Steel Screen, available in various openings, typically 35 or 50 Mesh, backed with a 12 Mesh support Screen.

·          Supported on single (drive) end only, eliminates the need for any bearings or bushings.

·          Spoked design, with lift paddles, to ensure proper cleaning of aggregates.

·          Integral Spray Nozzle assembly.

·          ½HP direct-drive Gearmotor.

·          4”Æ Bi-directional Drain.

 

Aggregate Auger:

·          12"Æ half-pitch AR steel Screw, 6' Long.  Dewaters aggregates and conveys them to stockpile.

·          1-½HP direct-drive Gearmotor.

·          Lower Bushing Assembly, machined UHMW bushing [eliminates bearings and seals].

·          4”Æ Drain.

 

Control Panel:

·          Available in 230 or 460VAC 3Ph.

·          NEMA 12 Enclosure.

·          Manual On/Off.

·          Includes main disconnect, motor starters, fuses and integral wiring for Reclaimer operation.

 

Water System:

·          Submersible Pump, 2HP, 230/460VAC 3Ph.

R2 Specifications

Up to 2 to 3 cubic yards-per-hour

[Many factors affect thru-put, such as aggregate size/shape, screen opening, etc.].

To contact us:

888-617-STAR (7827)

Email: sales@StarIndustriesInc.com

Home | Model R2 Reclaimer | STARFeeder | R2 Specifications | Photos | Contact Us

Concrete Reclaimers engineered for the Precast/Prestressed and Manufactured Concrete Industries.

Rights reserved to change Specifications and Dimensions.